Welcome to LearnEnglish Kids

In operating by elastic blows, the steam piston is cushioned at both the up and down stroke, and the action of a steam-hammer corresponds to that of a helve trip-hammer, the steam filling the office of a vibrating spring; in this case a hammer gives a quick rebounding blow, the momentum being only in part [111] spent upon the work, and partly arrested by cushioning on the steam in the bottom of the cylinder under the piston.

Games
Another peculiar feature in trip-hammers is the rapidity with which crystallisation takes place in the attachments for holding the die blocks to the helves, where no elastic medium can be interposed to break the concussion of the dies. Bolts to pass through the helve, although made from the most fibrous Swedish iron, will on some kinds of work not last for more than ten days' use, and often break in a single day. The safest mode of attaching die blocks, and the one most common, is to forge them solid, with an eye or a band to surround the end of the helve..
468
Songs
Your turn
Movements and strains may be called two of the leading conditions upon which designs for machines are based: movements determine general dimensions, and strains determine the proportions and sizes of particular parts. Movement and strain together determine the nature and area of bearings or bearing surfaces.?
372
Short stories
I could not stop there long, for I was actually within range. I saw a number of shells explode and twice hit a farmhouse, which was destroyed for the greater part. So I returned as quickly as possible to my little protégée, and went on with her, following the road as far as the canal, and then along this to Maastricht.!
11
Word games
First.—The power is connected to the hammer by means of the least possible mechanism, consisting only of a cylinder, a piston, and slide valve, induction pipe and throttle valve; these few details taking the place of a steam-engine, shafts, belts, cranks, springs, pulleys, gearing, in short, all such details as are required between the hammer-head and the steam-boiler in the case of trip-hammers or crank-hammers..
8
Video zone

Your Comments

He explained to me that one of those soldiers accused me of ... spying and arson. He had thought to recognise in me a person who had asked him that afternoon whether he was ... a Belgian or a German soldier, and whom he had also seen escaping from a factory which was in full blaze a moment later.
A few moments after they went away I went also, and entered the burning town once more. A Netherland family lived in Villa Rustica, and I had promised to make inquiries about them.
For pulleys, gear wheels, or other standard parts of machinery which are not likely to be modified or changed, iron patterns are preferable; patterns for gear wheels and pulleys, when made of wood, aside from their liability to spring and warp, cannot be made sufficiently strong to withstand foundry use; besides, the greatest accuracy that can be attained, even by metal patterns, is far from producing true castings, especially for tooth wheels. The more perfect patterns are, the less rapping is required in drawing them; and the less rapping done, the more perfect castings will be.
21 August, 2019 - 13:08
Same ! Who ever likes comics give me a reply
21 August, 2019 - 13:08
The best!